Product Overview

Note: Fixed Shipping Rate does not apply to Hawaii or Alaska.

The JED 603 Ozone Generator is designed for water purification in residential and commercial hot tubs, small pools, fountains, cisterns and water tanks up to 10,000 gallons. The JED 603 is supplied in a plastic rainproof enclosure that can be wall mounted outdoors. The JED 603 has its own air compressor that can pump ozone into a pool, tub, or tank up to 24 hours a day independently of water circulation. The JED 603 is typically installed in conjunction with an over the side kit or thru-hull fitting.

Specifications:

Dimensions: 9 1/2" x 8 1/2" x 4 1/2"
Input Voltage: 120 VAC, 60 Hz
Operating Current: .67 Amps
Ozone Output: 0.2 Grams per Hour
Power Consumption: 80 Watts
Air Compressor: 2.5 LPM
Shipping Weight: 6 pound

Also Includes:

Air Stone
20' of Hose
Check Valve

Documentation:

Product Brochure
Installation Instructions

Troubleshooting Tips

It is unusual for one of these units to fail during the warranty period. Typically if a JED Model 203 or 603 fails within the first year of use, something has blocked the airflow. Having the air stone positioned deeper than 4 feet below the surface of the water can also cause an issue. If the water inside the tank is deeper than 4 feet, you may devise a float in order to keep the air stone suspended at no more that 4 feet beneath the surface of the water. This allows the air stone to move up and down with changes to the water level without allowing it to fall deeper than 4 feet. Other possibilities that can block airflow would include a clogged air stone, kinked air hose, or the tubing getting pulled/yanked out of the corona discharge assembly—even only slightly. This causes ozone to fill the enclosure and destroy the unit. In some cases, a lightning strike can take out the transformer, and while the air pump might still work, it may no longer produce ozone.