Grundfos CU301 Controller & Transducer - Constant Pressure Kit (Version 7)


4.00 LBS
$22.00 (Fixed Shipping Cost)
Adding to cart… The item has been added

Product Overview

Note: Fixed Shipping Rate valid in 48 contiguous states only. Does not apply to Hawaii or Alaska.

CU301 Controller & Transducer - Constant Pressure Kit (2 Gallon Pressure Tank sold separately). The CU301 Controller and Transducer allow the Grundfos SQE Submersible Pumps to operate as "constant pressure" pumps. The 2 gallon pressure tank (sold separately), helps to prevent water hammer. When a valve is closed, and the water reverses direction back toward the pump, the pressure tank absorbs the shock of the water column in the piping.

Version 7 (latest version)

Factory preset limited to 70PSI (This can be adjusted at time of order for an additional fee from the factory. Call for details) 

GO Remote   GO Remote may be purchased to adjust the maximum 70PSI from your Smartphone


 Intelligent Control Box

CU 301 is specially designed for the Grundfos SQE 3" submersible pump to provide a constant pressure water package solution. The CU 301 is an intelligent control unit which capable of monitoring and displaying the system’s performance continuously whilst also providing a variety of protection features that guarantee a long lifetime of the pump. This CU301 Controller comes factory preset at a max of 70 psi.
Grundfos Material #96438895

Constant Water Pressure

There are numerous benefits of using CU 301 with the SQE pump, but none can outweigh the constant water pressure feature. The CU301/SQE package is the system that can turn the luxury idea of constant pressure to reality. You can always get what you expect when you turn on the tap.

Adjustable Water Pressure

All at the touch of one single button – you can adjust the water pressure from 2 – 5 bars at any time. Not only the water pressure will remain constant at your desired pressure level, the intelligent yet simple communication between SQE and CU 301 means the system will respond swiftly to the newly adjusted pressure level and provide instant comfort to the end users.

Easy to Use

The intelligent CU 301 box promises to do all the jobs for you. The only task for the end users is to switch on the box and choose the desired water pressure level through the super user-friendly operating interface. The system will delivers the comfortable water supply with the effort of pressing just two buttons on the box. The box displays pump information status in an easy-to-understand graphical way so it is easy to operate and monitor.

Constant Pressure System

With the user-friendly operating interface, the CU301 box is very suitable for daily domestic and small irrigation use. By choosing the water pressure on the box surface, end users can change the water pressure as frequent as needed.

Operation Monitoring

The CU301 receives signals from the pressure sensor constantly. Should the pressure dropped below the desired pressure level, the CU301 will operate the SQE pump automatically until the water pressure level restored to the desired level and the signal light on the display will indicate that the pump is running at the moment. Here is the five operating functions on the display cover:

  • On/off button
  • Button lock indication
  • System Pressure setting and indication
  • Indication of operation
  • Service alarm indication

Operating Relay

The operating relay can be used to operate an external equipment or add an additional sensor signal.

Service Alarm Indication

The pump will detect and give the below alarm signals:

  • Dry running of the pump
  • Service alarm will be permanently on if one of the following situations arises:
    1. Defective sensor
    2. Overload
    3. Over-temperature
    4. Speed Reduction
    5. Voltage alarm
    6. No contact to pump
Product Data Booklet
User Manual
Operation Quick Guide

Warranty Information

All Grundfos products come with a 2-year warranty that fully complies with legal requirements. The warranty covers product and material defects which are not the results of normal wear and tear for a period of 24 months from the date of delivery. The warranty period may not, however, exceed 30 months from the date of production. Warranty claims will be rejected in the following situations: If the defect in the product arises from: -any drawing, design or specification supplied by the customer/purchaser -modifications undertaken by the customer/purchaser or a third party without the consent of Grundfos If a defect is caused by: -normal wear and tear -inadequate maintenance or faulty repair by others than Grundfos -failure to observe the operating instructions -over-loading -use of any unsuitable material -the effects of chemical or electrolytic action -building or assembly work not undertaken by Grundfos -other reasons beyond Grundfos' control As a general rule, Grundfos will not accept to pay transportation/replacement/installation costs for faulty products. Warranty claims may be submitted by contacting the local Grundfos sales company or the point of sale. Benefit: -Knowledge that Grundfos backs its products with clearly defined warranty terms -Warranty claims with well-defined contacts and short response time.