30PSI SENNINGER PRESSURE REGULATING LIMIT VALVE, 1"NPT, PRLV30

$29.95
SKU:
PRLV-30-1
Shipping:
Calculated at Checkout

Product Overview

Senninger’s Pressure Regulating Limit Valve is used in place of standard pressure regulators to limit static (no flow) water pressure when a shut-off valve is used downstream of regulation point. It limits downstream pressure and protects downstream components. Each regulator maintains a constant preset outlet pressure based on its flow / inlet pressure.

Features

• 100% water tested for accuracy at Senninger’s in-house facilities

• Limits downstream pressure to no more than 15 psi (1.04 bar) above regulated pressure rating during static (no flow) conditions

• Maximum flow path resists plugging

• Very low hysteresis and friction loss

• Pressure: 30 psi (4.14 bar)

• Flow: 18 gpm (4088 L/hr)

• Inlet size: 1” NPT female

• Outlet size: 1” NPT female

• Backed by a one year warranty on materials, workmanship and performance

Documentation:
Data Sheet

Caution:Be sure to install pressure regulators in the proper direction. The arrow on the upper housing shows the direction of the flow and should always point downstream.Because the PRLV is designed to operate with clean water, the use of a filter upstream is recommended. Filters should be 100 mesh or finer and be capable of flowing up to 18 gpm (4088 L3/hr) with no more than 5 psi (0.34 bar) internal friction loss.- See more at: http://www.senninger.com/senninger-products/pressure-regulators/prlv-%E2%80%93-pressure-regulating-limit-valve/#sthash.le9futYD.dpuf