Product Overview
The galvanized steel tanks are G-90 grade, 20 gauge metal and made in the USA. Imported foreign steel is not used in the construction. The top is 22 gauge. After the tank is constructed, a paint/epoxy lining is applied to the interior of the tank to provide a protective barrier between the water and the metal itself. This pre-fabricated metal water tank is FDA approved for potable (drinking) water applications and is ANSI / NSF 61 certified. Each tank is tested at the factory to ensure that it is water-tight. These metal water tanks have a typical lifespan of 30-35 years and come with a 1-year warranty.
Please note: The dimensions listed above do not include the lid.
Storage tanks purchased for rainwater collection in the state of Texas are exempt from sales tax. Tanks shipped out of state are also tax free.
Features:
- 3/4" bulkhead fitting for accessing the water
- Protective outer coating
- ANSI / NSF 61 Approved, Epoxy Liner
- 1 year no-leak warranty
- Baskets and Overflows are sold separately
Recommended Accessories:
3" Overflow - Add $35
12" Basket - Add $40 (For 500 & 830 Gallon, 16" Basket, Add $60)
A 12" inspection cover can be added to any tank for $50.
Weights:
140 Gallons - 100 lbs
200 Gallons - 115 lbs
300 Gallons - 150 lbs
400 Gallons - 169 lbs
500 Gallons - 209 lbs
Delivery:
Call or email request for freight quote. Because there are many possible delivery options and freight companies (depending on where you are located in the U.S.), it's best to call or email to request a freight quote. When requesting a freight quote, please include your complete address. Send request for freight quote to: jim@rainwaterequipment.com
Note: These tanks may also be picked up in Dripping Springs, TX. Call Rainwater Equipment for lead times. 817-246-4567
Rainwater Harvesting Design Considerations
What size tank do I need?
This is one of the very basic questions, and there are two components to the answer.
1. What do you want to use the rainwater for? It can be used for:
Drinking water / indoor potable use
Watering flowerbeds and gardens
Drip irrigation systems
Washing cars and filling swimming pools
Not practical to use rainwater for irrigation, because a typical St. Augustine or Bermuda grass lawn requires 3,000-5,000 gallons of water per week.
2. How much water can you capture?
Use the following formula: 1" of rain on 1000 sq. ft. = 600 gallons of rainwater
In an average year, central Texas receives 30" of rain per year
A 2000 sq. ft. house can therefore capture nearly 35,000 gallons in a year
Rule of thumb: Design a system that can hold 1-2" of rainfall
3. What infrastructure do I need?
Gutters
A crushed granite pad or concrete
A first flush system is highly recommended
A permit is not required and they cannot be banned by an HOA
Documentation:
