Product Overview
Model: 1002745
Description: 30PMUWP (30' SJE Pump Master Pump Up Switch With Plug)
Mechanically-activated, wide-angle switch designed for direct control of pumps up to 1/2 HP at 120 VAC and 1 HP.
This mechanically-activated, wide-angle pump switch provides automatic control of pumps in:
- potable water
- water
- sewage applications
The SJE PUMPMASTER pump switch is not sensitive to rotation or turbulence allowing it to be used in both calm and turbulent applications.
Features:
- 30' Cable
- Passed NSF Standard 61 protocol by an approved Water Quality Association laboratory.
- Heavy-duty contacts.
- Controls pumps up to 1/2 HP at 120 VAC.
- 13A
- Adjustable pumping range of 7 to 36 inches (18 to 91 cm).
- Includes standard mounting clamp and boxed packaging.
- UL Recognized for use in water and sewage.
- CSA Certified.
- Three-year limited warranty
Documentation:
Spec Sheet
Installation Instructions
Specs:
CABLE: flexible 16 gauge, 2 conductor (UL, CSA) SJOW, water-resistant (CPE)
FLOAT: 3.05 inch diameter x 3.56 inch long (7.75 x 9.04 cm) high impact, corrosion resistant, PVC housing for use in sewage and water up to 140 degrees F (60 degrees C)
ELECTRICAL:
120 VAC 50/60Hz Single Phase
Maximum Pump Running Current: 13 amps
Maximum Pump Starting Current: 85 amps
Recommended Pump HP: 1/2 HP or less
230 VAC 50/60Hz Single Phase:
Maximum Pump Running Current: 13 amps
Maximum Pump Starting Current: 85 amps
Recommended Pump HP: 1 HP or less
Must cut 110V plug off when used w/ 230V
Recommended Pump HP: 1 HP or less
Note: This switch must be used with pumps that provide integral thermal overload protection.
