Grundfos Unilift AP12 Submersible Pumps

Unilift AP12 is a submersible pump designed for pumping clean, non-aggressive water and slightly dirty (grey) wastewater. The pump can be used as a portable unit.

Part No: #96010664.

Unilift AP12.40.08.1

Submersible drainage pump type

Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 1-phase totally enclosed motor
in insulation class F with thermal overload protection. The pump is fitted with a suction strainer.

The impeller is a Semi-open impeller for 7/16 in free passage suitable for pumping groundwater, surface water, rain water and
similar liquids.

The pump has a double shaft seal and an intermediate oil chamber pre-filled with 
non-toxic special oil.

The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and long-life deep-groove greased-for-life 
ball bearings. The pump is ready for use as it is fitted with carrying handle and is supplied with a 24.9 ft mains cable. The mains cable is of the plug type with glass sealing compound in the socket to prevent penetration of humidity into the stator windings.

Documentation:
Brochure
Data Booklet
AP Installation

Liquid:
Pumped liquid:	Water
Liquid temperature range:	32 .. 131 °F
Liquid temp:	68 °F
Density:	62.4 lb/ft³
Kinematic viscosity:	1 cSt
Technical:
Actual calculated flow:	27.9 US gpm
Resulting head of the pump:	42.4 ft
Type of impeller:	Semi-open
Maximum particle size:	7/16 in
Approvals on nameplate:	CSA
Materials:
Pump housing:	Stainless steel
Pump housing:	DIN W.-Nr. 1.4301
Pump housing:	AISI 304
Impeller:	Stainless steel
Impeller:	DIN W.-Nr. 1.4301
Impeller:	AISI 304
Installation:
Pump outlet:	Rp 1 1/2
Maximum installation depth:	25 ft
Electrical data:
Type of motor:	PSC
Power input - P1:	1.58 W
C run:	16 µF
Power input - P1:	1.2 kW
Main frequency:	60 Hz
Rated voltage:	1 x 220-230 V
Rated current:	5.8 A
Starting current:	24 A
Cos phi - power factor:	0,99
Rated speed:	3400 rpm
Capacitor size - run:	16 µF/400 V
Enclosure class (IEC 34-5):	IP68
Insulation class (IEC 85):	F
Length of cable:	24.9 ft
Type of cable plug:	NONE
Others:
Gross weight:	30.6 lb
Shipping volume:	1.17 ft³

All Grundfos products come with a 2-year warranty that fully complies with legal requirements. The warranty covers product and material defects which are not the results of normal wear and tear for a period of 24 months from the date of delivery. The warranty period may not, however, exceed 30 months from the date of production. Warranty claims will be rejected in the following situations: If the defect in the product arises from: -any drawing, design or specification supplied by the customer/purchaser -modifications undertaken by the customer/purchaser or a third party without the consent of Grundfos If a defect is caused by: -normal wear and tear -inadequate maintenance or faulty repair by others than Grundfos -failure to observe the operating instructions -over-loading -use of any unsuitable material -the effects of chemical or electrolytic action -building or assembly work not undertaken by Grundfos -other reasons beyond Grundfos' control As a general rule, Grundfos will not accept to pay transportation/replacement/installation costs for faulty products. Warranty claims may be submitted by contacting the local Grundfos sales company or the point of sale. Benefit: -Knowledge that Grundfos backs its products with clearly defined warranty terms -Warranty claims with well-defined contacts and short response time.