Product Overview
Mechanically-Activated, Wide-Angle Pump Switch
Pump switches provide automatic pump control.
The Double Float® Master pump switch is designed to directly control pumps up to 15 FLA, 90 LRA, 120 VAC or 240 VAC in non-potable water, water and sewage applications.
The Double® Float Master pump switch consists of two mechanical float and a splice tube. The splice tube contains a holding relay which enables the floats to function in series. The holding relay eliminates pump chatter in turbulent conditions allowing the Double Float® Master pump switch to operate relay control panels for larger pump applications.
This switch is well suited for confined space applications requiring an accurate pumping range. It is not sensitive to rotation or turbulence. This switch is voltage sensitive - use with correct voltage.
Features:
- Controls pumps up to 15 FLA, 90 LRA, 120 VAC or 240 VAC
- Adjustable pumping range of 3 - 48 inches (7.6 - 122 cm) with increased pumping range up to 6 feet (1.8 meters) available
- Includes standard mounting clamps and boxed packaging
Specifications:
Model: 15DFMMD1WOP
CABLE:
Attached to Float Housing:
Flexible 18 gauge, 2 conductor (UL, CSA) SJOW, water-resistant (CPE)
Above Splice:
Flexible 14 gauge, 3 conductor (UL, CSA) SJTW, water-resistant thermoplastic
FLOATS:
2.74 inches diameter x 4.83 inches long (7.0 x 12.3 cm) high impact, corrosion resistance, PP housing for use in sewage and water up to 140oF (60oC)
ELECTRICAL:
120 VAC 50/60 Hz Single Phase:
Maximum Pump Running Current (FLA): 15 amps
Maximum Pump Starting Current (LRA): 90 amps
240 VAC 50/60 Hz Single Phase:
Maximum Pump Running Current (FLA): 15 amps
Maximum Pump Starting Current (LRA): 90 amps
NOTE: This switch must be used with pumps that provide integral thermal overload protection.
Documentation
Spec Sheet
